Trees require a lot of maintenance for them to grow healthily. Although the procedure of maintenance involves a lot of activities, one of the most important activities is pruning, also called trimming. Trees that grow naturally in the forest do not need much intervention in the form of pruning because this task is handled naturally. On the other hand, landscape trees need more care so as to keep their aesthetics as well as structural integrity. Here are facts regarding Round Rock Tree Trimming.
It is crucial that the biology of trimming is understood well in order for trimming to be handled properly with no damage happening to the tree. Handling the task wrongly may cause serious damage to the plant whose recovery may not be possible throughout its whole lifespan. Also, the damage can considerably shorten the lifespan of the tree in question.
During trimming it is crucial to pay attention to which branches to retain and the ones to be removed. The potential of the tree to grow is affected with each cut in some way. As such, no branch is to be removed without a good reason. This is why paying attention to the 3 reasons for branch removal is important. The three are removing dead branches, improving form, and reducing risk.
Additional reasons for branch removal include increasing the amount of light and air penetration to the crown. For older trees, branches are removed for corrective or preventive reasons. The reason for this is because it has been proven that routine thinning really does not help with health improvement. Thoroughly inspecting the concerned tree is important before the job is started.
Determining the branches to remove and the ones to retain should be done by inspecting the tree from top downwards. The same approach should be adopted when pruning. Pruning from top downwards prevents one from removing branches that should not be removed. To avoid doing damage, not more than 25 percent of all branches should be removed at once.
When removing, one should target branches that are too big in comparison to the main trunk. The branches should be 30 percent or smaller than the main trunk. This is meant to ensure safety and reduce risk of the branch falling. If the plant is a deciduous one, the branches should not be removed more than 30 percent of the height from the bottom.
Most trees usually have a single trunk. As such, one should take time to identify which one is the main trunk in case there are multiple trunks. Before one moves to prune for form, they should remove any defective parts that can be identified. Cuts that result from the process can be painted to improve aesthetics. However, it is important to note that painting does not prevent decay in any way.
A person must assemble all the necessary tools before starting the job. The tools must be in proper condition and well sharpened. For branches that are so high a pole pruner would do. All major work that needs to be handled must be entrusted to a professional arborist.
It is crucial that the biology of trimming is understood well in order for trimming to be handled properly with no damage happening to the tree. Handling the task wrongly may cause serious damage to the plant whose recovery may not be possible throughout its whole lifespan. Also, the damage can considerably shorten the lifespan of the tree in question.
During trimming it is crucial to pay attention to which branches to retain and the ones to be removed. The potential of the tree to grow is affected with each cut in some way. As such, no branch is to be removed without a good reason. This is why paying attention to the 3 reasons for branch removal is important. The three are removing dead branches, improving form, and reducing risk.
Additional reasons for branch removal include increasing the amount of light and air penetration to the crown. For older trees, branches are removed for corrective or preventive reasons. The reason for this is because it has been proven that routine thinning really does not help with health improvement. Thoroughly inspecting the concerned tree is important before the job is started.
Determining the branches to remove and the ones to retain should be done by inspecting the tree from top downwards. The same approach should be adopted when pruning. Pruning from top downwards prevents one from removing branches that should not be removed. To avoid doing damage, not more than 25 percent of all branches should be removed at once.
When removing, one should target branches that are too big in comparison to the main trunk. The branches should be 30 percent or smaller than the main trunk. This is meant to ensure safety and reduce risk of the branch falling. If the plant is a deciduous one, the branches should not be removed more than 30 percent of the height from the bottom.
Most trees usually have a single trunk. As such, one should take time to identify which one is the main trunk in case there are multiple trunks. Before one moves to prune for form, they should remove any defective parts that can be identified. Cuts that result from the process can be painted to improve aesthetics. However, it is important to note that painting does not prevent decay in any way.
A person must assemble all the necessary tools before starting the job. The tools must be in proper condition and well sharpened. For branches that are so high a pole pruner would do. All major work that needs to be handled must be entrusted to a professional arborist.
About the Author:
Round Rock tree trimming services provide customers with everything they need to keep their gardens in tip top condition. To read our customer reviews now click here http://www.keepaustingreen.com/tree-services/tree-trimming.
No comments:
Post a Comment